Finished print: i45.tinypic.com As you can hear, my Y table badly needs new PLA bushings. You can hear it making lots of noise throughout the print. This was sliced at the following settings: Nozzle diameter: 0.35mm Nozzle temp: 190C Bed temp: 60C Perimeter speed: 80mm/s Small perimeters: 65mm/s Infill: 130mm/s Solid Infill: 100mm/s Bridges: 70mm/s Travel: 195mm/s Bottom layer speed ratio: 0.35 Layer height: 0.2mm This was printed using PLA on a Mendel Max.

Source: YouTube